Replacement Parts

For current Parts Placement Price List click here current Price List effective as of 03-04-09

     Click on any of the words below to get to that link.
     You will need Adobe Acrobat Reader to view or download them:

Why should I use factory original parts? 

Yes.
The FAA regulations require that only FAA approved parts may be used to repair FAA type certificate aircraft.  If you do not use FAA approved parts, your aircraft would technically be “UNAIRWORTHY”.

There are also regulations that the aircraft manufacturer must comply with in order to produce their product, components and replacement parts.  These regulations involve the design engineering, manufacture, and inspection of the items that they produce and sell as replacement parts.  A part cannot be signed off and sold as an FAA approved part unless every regulation that pertains to each of the steps listed is met.  The ultimate goal of all these regulations is the safety of the people on board the aircraft and people and property on the ground. Over the last 40+ years we have striven as a manufacture to build the highest quality and safest hot air balloons and replacement parts available.

One of the best examples of our dedication to producing the best part for the application is one of our smallest parts, the blast valve o-ring.  In the early days of hot air ballooning into the early 1980’s every pilot was familiar with a leaking blast valve.  Flights in colder weather or other conditions regularly produced this event that often resulted in a leaking valve stem.  Raven, now Aerostar, was not satisfied with the possibility of a problem.  Our engineers spent countless hours looking at the composition, sizing, manufacturing and quality control of this one small piece of our systems and ultimately redesigned this item.  The problem of blast valve o-ring failure was virtually eliminated with the new improved o-ring.  That o-ring is still produced and inspected to those tight tolerances.  Less than 1% of the blast valve o-rings that we receive are discarded because they do not meet our standards.  Each o-ring is weighed and inspected individually to insure that it meets our strict standards. 

The same commitment and dedication go into each part that we produce, certify and sell as a replacement part for your Aerostar/Raven hot air balloon.  Why would you want to settle for anything less then factory parts?  The safety of you, your crew and your passengers is paramount to us, shouldn’t it be to you as well.  Make sure that your Aerostar/Raven balloon is serviced with original factory parts.